Type MLF40 - for cheese with low gas release;

Type MLF45 - for cheese with moddle gas release.

Krehalon MLF40 and MLF45 bags can be produced in the following seal psitions variants:

  

Seals	Side seals	Straight	Semi-circular
Bags width	from 80 up to 650 mm	from 165 up to 650 мм	from 165 up to 650 mm
Bags length	from 165 up to 650 mm	from 200 up to 1300 mm	from 200 up to 1300 mm
Stick on a tape	Add. service	Add. service	Add. service

Colors: translucent, white, black, yellow 34, yellow 80, yellow 50, yellow 20, orange 10, red 30, green 25, green 70, blue 65.

Printing: на пакеты КРЕАЛОН тип MLF40, тип MLF45 может наноситься односторонняя или двухсторонняя печать. Количество цветов печати от 1+0 до 10+10.

Bags are delivered as follows:

* sticked on two tapes (for work on semi-automatic equipment);

* cut into single bags, packed in transporting bags by 100 pieces.

Recommended terms of shelf life of cheese packed into KREHALON type MLF40, type MLF45 bags

Name of cheese	Recommended trms of shelf life
Gollandsky bar Gollandsky round Kostromskoy Yaroslaky Stepnoy Estonsky Uglichsky	120 days at temperature from +2 up to +6 °С from the moment of ripening termination
Rossiysky	150 days at temperature from +2 up to +6 °С from the moment of ripening termination
Chedder	150 days at temperature from +2 up to +6 °С from the moment of condition ripeness
Rossiysky young	150 days at temperature from +2 up to +6 °С from the moment of ripening termination
Susaninsky	45 days at temperature from +2 up to +6 °С from the moment of condition ripeness
Poshekhonsky	120 days at temperature from +2 up to +6 °С from the moment of condition ripeness
Poshekhonsky IT	120 days at temperature from +2 up to +6 °С from the moment of condition ripeness
Kostromskoy IT	120 days at temperature from +2 up to +6 °С from the moment of condition ripeness

Storage and transportation of bags

Bags should be stored in dry and clean premises, temperature in the premises should not exceed 35 °С, relative humidity not above 60 %.

During storage and transportation it is not recommended to expose boxes with bags to high temperatures influence (above 35°С) and direct sunlight reach.

It is strictly prohibited to throw and to hit boxes with bags.

It is required to keep the bags which have been stored at temperature below 0°С before use at room temperature not less than for 24 hours not opening manufacturing packaging.

If long-term storage is required, it is recommended to repack under vacuum the bags which have not been used into a new bag.  

Recommended types of clips

Bag width	Cryovac	Technoclip
80 - 200 mm	FL	Н 548 Т (DST)
205 - 300 mm	FH	Н 550 Т (DST)
от 305 mm	FC	Н 550 Т (DST)

Thermal shrinkage

Themal shrinkage with the product is fulfilled with the help of thermal shrinkage tank. The equipment should ensure regulation and control over conditions and parametres of the technologocal process of thermal shrinkage.

Thermal shrinkage is fulfilled by dipping of the bag with the product into hot water or spraying of it by hot water at temperature from 85 °С up to 90 °С for 2-3 seconds.

It is recommended to regularly conduct scheduled works on washing and handling of the equipment.

Cheese ripening

Cheese ripening, packed into Krehaon type MLF40, type MLF45 bags, is made in accordance with Technological Advice for this kind of cheese.

During ripening of packed cheese it is required to monitor timely find out hermetization of bags break, what is accompanied by

 

 

 

что сопровождается развитием на сырах поверхностной микрофлоры. Такие сыры сразу же должны быть подвергнуты мойке, обсушке и повторно упакованы в пакеты.

Использование пакетов Креалон тип MLF40, тип MLF45 позволяет снизить потери сыра при созревании и исключает развитие ряда серьезных пороков внешнего вида (подкорковой плесени, цветных пятен на поверхности, подпревание корки).

Storage and transportation of the product packed into Krehalon type MLF40, type MLF45 bags

Product, packed into Krehalon bags type MLF40, type MLF45 should be stored at temperature 4-2 °С and relative humidity 80-85%. Terms of storage are set on the basis and in accordance with normative documents in force.

Guarantee of the manufacturer

The manufacturer guarantees the correspondence of the bags to TU requirements if conditions of transportation and storage at the consumer's warehouses are observed and manufacturer's packaging integrity is preserved.

Term of storage of bags under guarantee - 1 year from the date of manufacturing.