Catalog

Fibrous CRF

Fibrous CRF Fibrous CRF - fibrous casing made under innovative technology, with oversuffing +15-16% from a nominal caliber as its an important advantage.
Manufacturer: ViskoTeepak
Purpose:  Boiled sausages and Ham, Semi-dry smoked/cooked sausages, Dry sausages
Заказать товар
Заказать товар
Код проверки
Послать
Очистить
Fibrous CRF

SCOPE OF USE:

  • Cooked and smoked cooked sausages and hams
  • Semi-smoked sausage products
  • Raw dried и air dried sausages

FEATURES AND BENEFITS:

  • Complete similarity of appearance with non-edible collagen casings
  • High mechanical strength
  • Excellent heat shrink qualities
  • Advanced elasticity
  • Smoke permeability

Calibers CRF: 043, 045, 047, 050, 053, 055, 057, 060

Colors: Clear 00, B 07, Nat 08, Mahogany Light 10, Amber 13, Mahogany 17, Red 18, Red 20, Nat 30, Nat 34, Nat 35, Orange Brown 36, Meranti 37, Nat 40, Nat 55, Onion 56, Brown 92, Brown 93.

Stage I. Preparation

Soak a casing in water at temperature 25-35 оС for 10 – 30 minutes.

It is recommended not to store soaked casing for more than 24 hours.

The casing that has not been used should be stored in protective polyethylene package.

Stage II. Stuffing

Stuffing is made on all kinds of automatic and semi-automatic equipment.

It is not recommended to be used for sausages to cut.

The Table of recommended calibers for stuffing

Nominal caliber of a casing

mm

Number of a spindle (outer diamater), mm

Caliberof stuffing of a casing, mm

45

24,28

49 – 51

47

28

52 - 54

50

28

55 - 58

53

28

58 - 61

55

28,36

60 - 63

57

28,36

62 - 65

60

36

66 - 69

The main undisputable advantage of CRF fibrous casing is its stuffing ability. In optimal conditions overstuffing of 15-16% from a nominal caliber can be reached, but this figure is not quaranteed by the manufacturer.

If shirring with enlarged length of a casing in a shirring stick is needed, it is necessary to mind the its density increasing, and you should use a spindle of less diameter.

Stage III. Clipping

The casing is to be clipped on all kinds of clippers.

The Table of recommendations on clipping for «Poly Clip FCA» and «Alpina» clippers:

Caliber of a casing, mm

Diameter of a spindle, mm

Size of a clip

Number of a matrix

45–50

28

15х8 (5х1,75)

15x9 (5х1,75)

18х7 (5х1,5)

18х7 (5х1,75)

18х9 (5х1,75)

18х9 (5х2)

15x8

15x9

18x7

18x7

18x9

18x9 

50–55

28,36

15x9 (5х1,75)

15x9 (5х2)

18х9 (5х1,75)

18х9 (5х2)

15x9

15x9

18х9

18х9

55–65

36

15x10 (5х1,75)

15x10 (5х2)

18х9 (5х1,75)

18х9 (5х2)

18х10 (5х2,2)

18х10 (5х2,5)

15x10

15x10

18х9

18х9

18x10

18x10

65–75

48

15x10 (5х1,75)

15x11 (5х2)

18х10 (5х2,2)

18х10 (5х2,5)

18х11 (5х2)

18х12 (5х2,2)

18х12 (5х2,5)

15x10

15x11

18х10

18х10

18х11

18х12

18х12

 

Stage IV. Heat treatment

Process

Temperature in a chamber,

oC

Temperature inside a sausage stick,oC

Relative humidity,

%

Duration,

min

Roasting

55-60

-------

 

20

Drying

60-65

-------

25-30

20-40

Smoking

65-70

-------

75-80

20-40

Cooking

75-78

72

100

~20

Stage V. Cooling

Spraying by cold water for 10-15 minutes, break for 5-7 minutes, then spraying again by water for 10 minutes up to temperature of 40-42 оС inside a sausage stick.

To ger wrinkled surface of the product exclude the stage of spraying.

Storage conditions

It is necessaru to store the casing in the manufacturer's package in closed, clean ad dry warehouse premises, without off-odors, protected from sunlight, at the distance not less than 1 meter from heaters, at temperature 15-20 °С and relative humidity of 60-70 %.

Storage terms

24 months from the date of manufacturing on condition that you prevent manufacturer's package from breaking.

ВИДЕОМАТЕРИАЛЫ

‹‹‹ Back to catalog