- Cooked and cooked smoked sausage products
- Raw sausage products, curve-shaped (such as “Mergez“ sausages, Cumbrian sausages, Ukranian fried sausages) to grill or freeze later on.
SCC - is used for manufacturing of cooked and cooked smoked sausage products of a curved shape.
Calibers:
SCC: 19-25 mm (19 / 21 / 23 / 25)
Shirring
Variants of shirring of a casing in 1 core from 27 ft.( 8,2296 m) to 60ft. (18,288 m)are available.
Depending on a stuffing equipment, cores can have special types of ends:
OE- open end
CE- closed end
Knot- узел
Colors: transparent
Preparation
SCC casings can be used without any preparation.
Avoid moisture loss. Stuff within the bounds of the recommended diameter.
Recommendations on stuffing:
Nominal caliber |
Recommended caliber of stuffing, mm |
Recommended nozzle, mm |
||
19 |
19 |
+/- |
0,5 |
11 |
21 |
21 |
+/- |
0,5 |
12 |
23 |
23 |
+/- |
0,5 |
13 |
25 |
25 |
+/- |
0,5 |
15 |
28 |
28 |
+/- |
0,5 |
16 |
30 |
30 |
+/- |
0,5 |
17 |
32 |
32 |
+/- |
0,5 |
20 |
34 |
34 |
+/- |
0,5 |
21 |
36 |
36 |
+/- |
0,5 |
23 |
38 |
38 |
+/- |
0,5 |
23 |
40 |
40 |
+/- |
0,5 |
23 |
43 |
43 |
+/- |
0,5 |
27 |
Recommendations on heat treatment of SCC:
Step |
Temperature in a chamber (°C) |
Humidity (%) |
Temperature in a stick center (°C) |
Duration (min) |
1. Precooking 1 |
50 |
95 |
|
20 |
2. Preccoking 2 |
60 |
80 |
|
10 |
3. Drying |
65 |
|
|
10 |
4. Smoking |
65 |
75 |
|
10 |
5. Smoke extraction |
68 |
|
|
2 |
6. Cooking |
76 |
99 |
72 |
|
7. Spraying |
By cold water for 3 minutes, then 2 minutes break. Repeat several times |
Recommendation on heat treatment of SCC-B for its usage for heat treated product manufacturing to fry later on.
It is recommended to hang the product on frames not mote than 2+2 (for calibers from 26). If possible, use the lowest speed of chamber ventilators rotation.
Step |
Temperature in a chamber, ⁰ С |
Duration, min |
Drying |
60 ⁰ С |
15-20 min (depending on a caliber) |
*Smoking |
65-70 ⁰ С |
15-20 min (depending on a color required) |
Drying |
65-70 ⁰ С |
5 min |
Cooking |
max.76 ⁰ С |
up to 72 ⁰ С in a stick center |
Spraying/ cooling |
|
By cold water for 3 minutes, then 2 minutes break. Repeat several times. |
*this step is optional, depending on an end product